Flow and Scour Near an Abutment
Laboratory experiments were used in conjunction with a two-dimensional depth-averaged numerical flow model, RBFVM-2D, to investigate the relationship between flow velocity distribution...
Computation of Flow Past a Cylinder Mounted on a Flat Plate
The surface shear stress distribution in the vicinity of a circular cylinder - mounted normal to a rigid flat plate - produced by the three-dimensional flow past it, is investigated numerically...
Velocity Downstream of a Submerged Pipe Outlet
The velocity downstream of a submerged pipe outlet was examined in time and space. A model study was performed to examine the influence of boundary roughness changes on the velocity dissipation....
Shape Effect on Bed-Load Transport in Pipes
The nature of part-full flows in pipe sewers produces different channel shapes resulting in non-uniform shear stress distribution on the wetted perimeter. New experimental data were utilized...
Numerical Modeling of Unsteady Compound Channel Flow
The unsteady open channel flow equations describing conservation of mass and momentum (St. Venant equations) are integrated numerically to determine the depth of flow and the rate of discharge...
Hydraulic Modeling of Fish Screens
Hydraulic model studies coupled with available knowledge of fish behavior can be important component in the development of fish-screening systems. To reproduce in a model the flow field...
Flow Resistance Properties of Flexible Linings
Flow resistance for flexible channel linings is a function of the relative roughness of the lining in accordance with boundary-layer principles. As with vegetation, flexible linings have...
Rheometry of Natural Sediment Slurries
Recent experimental analyses of natural sediment slurries yield diverse results yet exhibit broad commonality of rheological responses under a range of conditions and shear rates. Results...
Wind Induced Circulation in Shallow Lakes
Clear Lake is a relatively shallow lake in Northern California. Natural flows are small but at times they do transport heavy metals into the lake. In order to predict water quality constituent...
Bed Shear Stress in Unsteady Open-Channel Flows
In this study, velocity distributions over smooth and rough beds were accurately measured with an LDA in unsteady open-channel flows. The log-law distributions yielded well in the wall...
Riprap Design at Bridges?Factor of Safety Approach
The factor of safety method offers a physically based methodology for design of riprap that relates the applied shear stress on the channel boundary to the stability of the riprap layer....
Riprap Incipient Motion and Shields' Parameter
Unobstructed incipient motion data from a variety of sources are compiled to re-examine current thinking regarding riprap stability. Shields' framework is investigated and relationships...
A Study on Debris Flow Surges
The mechanism of development of debris flow surges i studied theoretically and experimentally. It is proved that the development of viscous debris flow from continuous flow into a series...
Acoustic Doppler Current Profiler for Inlet Current Measurements
A BroadBand Acoustic Doppler Current Profiler (BroadBand ADCP) was used to survey tidal currents at Shinnecock and Moriches Inlets, Long Island, NY. Measurements were made remotely form...
Turbulent Velocity Flutuations in Natural Rivers
The longitudinal and transverse components of flow velocity, as well as the normal and tangential stresses, must be expected to fluctuate with time and space when flow at a high Reynolds...
Time-Dependent Landslide Probability Mapping
Case studies where time of failure is known for rainfall-triggered debris flows can be used to estimate the parameters of a hazard model in which the probability of failure is a function...
Rainfall Depth-Duration-Frequency Analysis for Major Cities in Taiwan
The annual series of extreme rainfall amounts for various durations are compiled. The statistics such as mean, standard deviation, coefficient of variation, coefficient of skewness, and...
A New Type of Concrete Trapezoid Dam
A new type of 128.0 m height concrete trapezoid dam (t-d) has been built for the Wunana Town Hydroelectric Power Station (WTHPS). The paper presents its optimum section design, several...
Serviceability Stress Limits for Composite Beams
Serviceability limits are increasingly becoming the critical design requirement for composite beams. A set of three illustrative design studies indicates that this is particularly true...
A Simple Finnish Method for the Structural Fire Design of Composite Structures
The structural fire design of composite structures in Finland has previously been based on furnace tests, which are expensive and take too much time to arrange. With the increasing prominence...
Return to search